This system
has a solid aluminum cover on the top of the gutter to prevent debris from clogging
your gutters. In addition it will also keep the snow and ice from building up
in your gutters.
Waterloov is the most flexible product ever
invented. It can be installed on all roof pitches from flat to mansard (vertical)
and on all types of gutters. It is either installed under the shingles or mounted
on the fascia board.
Basic
Standard Installation:
The flat rear edge is installed under either
the first or second course of shingles. No nails, glue, or fasteners of any kind
are ever used that could leak or ruin your roofing. In addition to being a gutter
cover, Waterloov serves as a drip edge.
The front lower flange
is installed under the lower lip of gutter and hard fastened there with stainless
steel screws to make it virtually hurricane proof.
Metal
or flat roof installation:
Where there are no shingles, a fascia board
mount installation is used. A ledge is installed on the fascia board near the
roofing which serves as a drip edge into the gutter. The rear edge of the panels
is installed on this ledge with the front being installed as in standard installation.
Round
Lip Gutters or straight wall gutters:
The rear edged of the panel is
installed per one of the methods described above. A ledge is installed on the
upper portion of the round lip gutter or the straight wall gutter. The front lower
flange of the Waterloov panel is installed under this ledge and fastened with
stainless steel screws. Panels are available which are wide enough to install
on residential 5" width gutters, 6" or 7" commercial gutters.
